What is dirt bike helmet?
A dirt bike helmet is a protective headgear that is specifically designed to keep the rider safe while riding off-road motorcycles or dirt bikes. These helmets are made from high-quality materials such as polycarbonate, fiberglass, and carbon fiber.
They have visors that protect the rider’s eyes from debris, dust, and rocks kicked by other riders or vehicles. Dirt bike helmets also come with ventilation systems that help regulate temperature and prevent overheating during long rides in hot weather conditions.
The interior of these helmets features foam padding that provides comfort for the wearer’s head while reducing shock impact in case of an accident or collision. Most importantly, wearing a dirt bike helmet is mandatory for every rider who wishes to stay protected and reduce their risk of sustaining severe injuries in case of a crash on rough terrains.
Materials you will need
- Wrenches and screwdrivers
- Bucket
- Water
- Sponge or soft-bristled brush
- microfiber towel or soft cloth
- Mild soap or specialized cleaner
- Automotive wax
- Silicon spray
- Antibacterial spray (for added cleanliness if desired)
More From Helmetinsights’ Blog
Do and Don’t of Cleaning Dirt Bike Helmets
Dirt bike helmets are essential for ensuring the safety of riders while they’re out on their dirt bikes. However, with prolonged use comes a buildup of sweat, dirt, and debris inside the helmet that can lead to unpleasant odors and even bacteria growth. Therefore, it’s crucial to clean your dirt bike helmet regularly.
Taking proper care of your dirt bike helmet is crucial for its longevity and effectiveness. Follow these simple steps to clean your helmet without causing any damage or harm.
Do
- Use only mild soaps and cleaners on the liner and shell, as harsh chemicals can cause irreparable damage to the helmet materials.
- A soft toothbrush or cotton buds come handy to clean out vents that could accumulate dust particles over time.
- After washing, air-dry it thoroughly or use a fan but avoid heat and direct sunlight at all costs as they can distort or discolor certain parts of your helmet’s exterior finish.
- Waxing after cleaning is to improve the shell shine and make it lost longer.
- Use silicone spray for lubricating any moving parts
- Always store helmet in cool dry place.
- Be careful when pulling on the chin strap because it can lose screws and lining
- Take care not to over-tighten the chin strap or visor.
However, there are some things you should not do when cleaning your dirt bike helmet too!
Don’t
- Do not use petroleum-based solvents or cleaners on your helmet as they might cause severe chemical reactions leading to permanent damages.
- Refrain from scrubbing harshly on either the shell or visor surface
- Don’t apply ammonia-based glass/window cleaner on visors as they can damage its anti-fog coating.
- Avoid using harsh soaps/dishwashing liquids inside liners that may lead them deteriorating faster than usual.
- Lastly, never store gloves inside helmets since they get sweaty too which will eventually bring about germ build-up within both items – this could potentially be dangerous!
How to Clean Dirt Bike Helmet Step By Step
Inner shell Cleaning
The inner shell of a dirt bike helmet can be particularly tricky to clean, but with the right tools and techniques, it can be done effectively.
To clean the inner shell of a dirt bike helmet, first remove all removable parts such as cheek pads and visor. For the inner shell, use a soft-bristled brush or cloth to gently scrub away any sweat or grime buildup. Pay special attention to areas such as vents where sweat can accumulate over time.
Once you have cleaned everything, rinse off with cool water and let it air dry completely before reassembling your helmet back together again for your next ride adventure.
Remember not to use harsh chemicals or abrasive materials when cleaning your dirt bike helmet as this can damage its protective properties!
Cleaning Cheek Pads
Helmet pads are crucial parts that prevent brain injuries during an accident. The buildup of sweat, dirt and grime on the inner lining can cause discomfort and foul odor, so it’s essential to clean them regularly.
First, detach the pads from the helmet by following manufacturer instructions. Soak them in a bowl with warm water and mild detergent for about thirty minutes to remove any dirt or oil buildup.
Gently scrub each pad using a soft-bristled brush to get rid of stubborn stains or odors. Rinse well with cold water and squeeze out excess moisture before air drying overnight in a cool place away from direct sunlight or heat sources such as hair dryers, radiators or tumble dryers which may damage their shape or elasticity over time.
After they’re completely dry, reattach the pads back onto your helmet according to instructions provided by the manufacturer – ensuring a snug fit without any wrinkles or gaps between your head and padding inside for maximum protection while riding off-road!
Cleaning Visor
Cleaning dirt bike helmet visor is an important task that should not be overlooked. After every ride, the helmet collects dust, mud, and other debris which can obscure your vision while riding.
- Firstly, you should remove any loose dirt or debris from the surface of the visor using a soft-bristled brush or microfiber cloth.
- Next, use warm water and a mild soap to wash away any remaining grime on both the exterior and interior surfaces of your visor.
- For stubborn stains or marks, you can apply some vinegar or baking soda solution followed by another round of gentle cleaning.
- Rinse it thoroughly with water and gently pat dry with a clean microfiber towel to avoid scratches.
Cleaning Chin Strap
Cleaning dirt bike helmet chin strap is an essential task that needs to be done on a regular basis
- As for cleaning the chin strap, loosen it up enough to get access beneath it
- Then wipe down any dirty spots with soapy water before rinsing it off thoroughly until all suds are gone.
- Allow sufficient time for drying before using your helmet again – ideally in a well-ventilated area for about 24 hours –
This will help ensure that no moisture remains trapped inside which could cause unpleasant odors or even mold growth over time if left unattended!
Conclusion
Keeping your dirt bike helmet clean is important for both safety and longevity. By following the step-by-step guide outlined in this article, you can ensure that your helmet stays in top condition and continues to provide the protection you need while riding.
Remember to always use gentle cleaning products, avoid harsh chemicals or abrasive materials, and never submerge your helmet in water. Additionally, be sure to check your manufacturer’s instructions for any specific cleaning recommendations.
By taking good care of your dirt bike helmet, you can extend its lifespan and enjoy many safe rides on the trails ahead.